Pour-in-Place Vinyl Bucks
|Model Number||Description||Flood Coverage||Air Ventilation|
|Pour-in-Place Vinyl Bucks||Varies per model.||Varies per model.|
|Vent Size||Rough Opening|
|Varies, see Spec Sheet.||n/a|
About Options & Accessories
BIM Files Now Available on ARCAT
Pour-in-Place Vinyl Bucks
The SMART VENT Pour-in-Place Vinyl Buck is made of high strength PVC. Each wall buck accepts SMART VENT models 1540-510, 1540-511, 1540-150202E (1540-0039) and FLOOD VENT models 1540-520, 1540-521, 1540-150202E (1540-0239) flood vents. Fully assembled units are shipped ready to install with a protective film and wood bracing that protects the buck and flood vent when the wall is poured.
The SMART VENT Pour-in-Place Vinyl Buck comes in several widths to accommodate most standard wall thicknesses. For Model Numbers and more please view our Pour-in-Place Buck Spec Sheet.
Trim & Sleeve Kits/Fire Dampers
The Trim Flange unit fits into the rough opening to provide a clean finished look on the interior wall. Trim flanges are available for use with standard masonry flood vents (1540-533) and Wood Wall Models (4” depth 1540-573 and 9” depth 1540-573-9) come standard in white.
The stainless steel sleeve lining is available in a 7 inch sleeve that can expand up to 12 inches, and a 10 inch sleeve that can expand up to 15 inches.
SMART VENT manufactures two UL-certified Fire Damper models. A masonry installation model (1540-530) and a wood wall installation model (1540-537). These fire dampers are certified to provide two hours of fire resistance. It is intended to be used in a situation in which fire proofing is required on a wall in which flood venting is installed, usually in a garage or vestibule. A fusible link holds a galvanized steel door in place. At 165°F (73.9°C), the link melts to permit the door to drop, blocking the path of the fire. Compatible with SMART VENT and FLOOD VENT models - The Fire Damper can safely be installed in the same cavity for either of the flood protection models, without interfering in their operation. Trim flange and inner sleeve are required for installation as well as a 8-inch minimum wall depth. For more information please view our Accessories Spec Sheet.
SMART VENT has a team of engineers and Certified Floodplain Managers on hand to help you with your next commercial project. We have the capabilities of designing and manufacturing custom frames to accommodate our 16-in. x 8-in. & 14 1/2-in. x 8 1/2-in. flood vent doors. These custom frames allow you to get the required flood protection for the project square footage with fewer openings. These frames and flood doors are available in powder coat colors: white, wheat, gray and black.
We offer full CAD capabilities that allow you to implement the custom frame design easily into your project drawings. We will assist in proper vent placement and help with all phases of the project to assure the flood vent system is installed correctly and is to your specifications. To start the custom frame design process, please contact our technical support team at 877-441-8368.
Check out our FAQs
Still Have a Question?
Contact our Sales and Support Office